Intercom/Locator
Conference calls
The handset and base unit, or 2 handsets can have a conference call with an outside party.
The following 2 methods are available:
–Another person presses {C} on the handset or {s} on the base unit while one person is talking with an outside party (“Call share”, page 18).
–One person pages another person during an outside call as follows.
Handset
1During an outside call, press {INT} to put the call on hold.
2To page the base unit, press {0}. To page a specific handset, enter the handset number.
3Wait for the paged party to answer. L If the paged party does not
answer, press {INT} to return to the outside call.
4To establish a conference call, press
{3}.
L To leave the conference, press {ih}. The other parties can continue the conversation.
Base unit
1During an outside call, press {x} to put the call on hold.
2To page a specific handset, enter the handset number.
To page all handsets, press {0}.
L When you page all handsets, only
the handset user who answers first can take the transferred call.
3Wait for the paged party to answer. L If the paged party does not
answer, press {x} to return to the outside call.
4To establish a conference call, press
{3}.
L To leave the conference, press {s}. The other parties can continue the conversation.
Handset locator
You can locate a misplaced handset by paging it.
1Base unit:
Press {x} and wait for a few seconds.
L All registered handsets beep for 1 minute.
2To stop paging:
Base unit: Press {x}.
Handset:
Press {INT}, then press {ih}.
Note:
L Even when the ringer volume for outside calls is set to off (page 23), the handset rings at a high level for paging.
40
