Introduction
For your safety
To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.
WARNING
Power connection
LUse only the power source marked on the product.
L Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.
L Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
L Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
LUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact an authorised service centre.
L Never touch the plug with wet hands. Danger of electric shock exists.
Installation
L To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.
L Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms.
Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
Operating safeguards
LUnplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.
L Do not disassemble the product. L Do not spill liquids (detergents,
cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall socket, and do not use.
Medical
L Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of
1.88GHz to 1.90 GHz, and the RF transmission power is 250 mW (max.).)
L Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
CAUTION
Installation and relocation
L Never install telephone wiring during an electrical storm.
LNever install telephone line sockets in wet locations unless the socket is specifically designed for wet locations.
5
