Answering System
Caller’s recording time
You can change the maximum message recording time allotted to each caller. You can also select “Greeting Only” which sets the unit to greet callers but not record messages. The default setting is “3 Minutes”.
1K(middle soft key)
2{V}/{^}: “Answer System” i
M
3{V}/{^}: “Settings” i M
4{V}/{^}: “Recording Time” i
M
5{V}/{^}: Select the desired setting. i Mi {ih}
Note:
L You may create your own greeting- only message by following the steps on page 31.
The unit plays the
Call screening
You can set the call screening feature on/off. For details, see page 30.
Base unit
The default setting is off.
To turn call screening on
Press and hold {■} until a long beep sounds.
To turn call screening off
Press and hold {■} until a short beep sounds.
Handset
The default setting is “On”.
1K(middle soft key)
2{V}/{^}: “Answer System” i
M
3{V}/{^}: “Settings” i M
4{V}/{^}: “Call Screening” i
M
5{V}/{^}: Select the desired setting. i Mi {ih}
36
