2Press and hold SET for over 3 seconds.
SET
The SET indicator flash.
SET
TV DVD SAT CBL
VCR CD TAPE AMP
3Press the Component Select button for the component whose signals are to be “learned.”
VCR
The SET indicator flashes and the selected Component Select button light up.
SET
TV DVD SAT CBL
VCR CD TAPE AMP
4Press the button on the Commander you want to “teach.”
The SET indicator flashes and the selected Component Select button lights up. (Learning function standby).
SET
TV DVD SAT CBL
VCR CD TAPE AMP
If another signal has already been “learned” by that button
The SET indicator flashes twice, and the Commander takes no action returning to its state after the Component Select button was pressed in Step 3. Either “teach” to another free button, or clear the already “learned” function (page 22) and start over from the beginning.
Continued
17