Sony RM-VL600 To program the Power-Oncommand

To cancel the setting, press SET.

To program the Power-On command

Repeat the same procedure, pressing the desired Component Select button.

Notes

•If the component code of a non-Sony brand has been set on a Component Select button, you cannot program the Power-On function on it. If you change the component code (page 10) after setting the Power-On function, the Power-On function is cleared. (The Component Select button flashes twice to indicate that you cannot set this function.)

•Even if you used the Learning function (page 16) to program a signal on a Component Select button, you can program the Power-On function on that button but it cannot be used. If you clear the “learned” function on that button, you can use the Power-On function.

28