Sony RM-VL600 Programming remote, control signals to the, and System Control, buttons, Commander, Function (continued), Component Select buttons, remote control — Learning

Programming signals of another
	2 Press and hold the
remote control — Learning
Function (continued)		Component Select button
		for the component whose
Programming remote		signals are to be “learned”
control signals to the		for over 3 seconds.
Component Select buttons		DVD
and System Control
buttons		To teach signals to the SYSTEM
You can “teach” one operating		CONTROL buttons, press and
		hold the desired SYSTEM
procedure to a Component Select
		CONTROL button for over 3
button and System Control
		seconds.
buttons, so that when you press
the Component Select button and		Both the SET indicator and the
System Control buttons, the		selected Component Select
operation is also automatically		button light up.
done.
For example, if it is necessary to		SET
switch the input selection of an		TV	DVD	SAT	CBL
amplifier to DVD when you use a
DVD player, “teach” an input		VCR	CD	TAPE	AMP
select signal to the DVD button.
After “learning,” the input		When you “teach” signals to
selection of an amplifier is		the SYSTEM CONTROL
automatically switched to DVD		buttons, only the SET indicator
just by pressing DVD. (For this		lights up.
operation, the amplifier should

first be turned on.)	When the SET indicator lights
	up, you can release the
Example: To “teach” the DVD	Component Select button. The
	SET indicator flashes and the
input remote control signal of
	selected Component Select
your amplifier to the DVD
	button lights up (Learning
Component Select button of the
	function standby).
Commander

1Follow Steps 1 to 2 (page 16).

SET

TV DVD SAT CBL

VCR CD TAPE AMP

When you “teach” signals to the SYSTEM CONTROL buttons, you can release the SYSTEM CONTROL button when the SET indicator lights up. The SET indicator lights up, but the SYSTEM CONTROL button does not light up.

20