Controlling the Volume of Visual Components Connected to an Audio System (continued)

2While holding MUTING pressed, press VOL + or VOL –.

To set all volume controls toAMP

Press VOL + while holding MUTING pressed.

All Component Select buttons light up when you press these buttons, and then turn off when you release them.

Press and while holding VOL+, press MUTING.

TV DVD SAT CBL

VCR CD TAPE AMP

Volume control setting complete.

TV DVD SAT CBL

VCR CD TAPE AMP

To set only the audio components’ volume controls to AMP

Press VOL – while holding MUTING pressed.

Only AMP lights up when you press these buttons, and then turns off when you release them.

Press and while holding VOL–, press MUTING.

TV DVD SAT CBL

VCR CD TAPE AMP

Volume control setting complete.

TV DVD SAT CBL

VCR CD TAPE AMP

Visual components are:

TV, video cassette recorder, analog cable box, digital cable box, digital satellite tuner, DVD player, digital video recorder

Audio components are: CD player, MD player, cassette deck, amplifier, DAV

To cancel setting, press SET.

Notes

•If you used the Learning function to program the VOL +/– or MUTING buttons to send a signal to a component, the procedure above will not change the function of the VOL +/– and MUTING buttons.

26