Table of Contents |
|
| Unpacking ............................................................ | 16 |
| Package Contents ................................................ | 17 |
| Setting the DIP Switches ..................................... | 17 |
| Setting the SCSI ID | 17 |
| Setting the Loop ID | 17 |
| Installing the | 18 |
| Connecting the Power Cable .............................. | 18 |
| Installing Device Drivers ..................................... | 18 |
| Connecting the SCSI Bus Cable |
|
19 | |
| Connecting the Optical Fiber Cable for Fibre |
|
| Channel | 20 |
| Turning On the Unit ............................................ | 20 |
| What’s Next? ........................................................ | 21 |
Unpacking
Note
You will need the box and packing materials if you wish to move or transport the unit. Retain them for future use.
1 Remove the unit from the box as indicated below. Remove the packing materials, such as plastic covers and tapes.
2 Inspect the unit for shipping damage.
If there is damage, do not use the unit. Report the damage immediately by contacting your dealer.
© 2003 Sony Corporation. All rights reserved.Trademarks
•Sony, Advanced Intelligent Tape, and Super Advanced Intelligent Tape are trademarks or registered trademarks of Sony Corporation in this country, other countries, or both.
•Other product names are trademarks or registered trademarks of their respective owners in this country, other countries, or both.
16 Unpacking