15GB
Getting Started

Replacing the battery of the

remote control

If the remote control stops working, replace
the battery (CR2025) with a new one.
1Pull out the battery holder.
2Remove the old battery from the battery
holder and then insert a new battery.
3Reinsert the battery holder into the remote
control.
Turning the Unit On or Off
Set the OPERATE ON/OFF switch
to ON
The ?/1 (on/standby) indicator flashes in
green and the illumination indicator lights up.
You can operate this unit when the ?/1 (on/
standby) indicator lights up in green and the
illumination indicator lights up. It may take a
while.

To set the network standby

mode

1Set the STANDBY MODE switch to
NETWORK STANDBY.
2Press the ?/1 (on/standby) button.
The ?/1 (on/standby) indicator lights up in
amber.