20GB
4Press the WPS button on the
unit for three seconds.
The LINK indicator lights up in green
when the connection is made.
Your computer must be connected to the
wireless LAN router/access point in advance.
Write down the SSID of your wireless LAN
router/access point.
Refer to the operating instructions of the
access point.
1Check whether your computer
and wireless LAN router/
access point are turned on.
2Connect the unit and the
wireless LAN router/access
point using a network (LAN)
cable.
3Turn the unit on.
4Click [My Network] or [Network]
t [SA-NS500].
The [Sony Network Device Setting]
screen appears.
Notes
•Install the UPnP service in advance if you are
using WindowsXP (page 35).
•Refer to “Setting Screen on the Browser”
(page34) for deta ils on the display of [My
Network] or [Network].
•Check your set-up of the f irewall of the
security software if you cannot find
[SA-NS500] or the browser does not open
even if you double-click [SA-NS500] on
screen of your computer.
•Restart your computer if you cannot find
[SA-NS500].
5Select the desired language
when the “Language Setup”
screen appears.
6Select [Network Settings] from
the menu.
7Enter the SSID of your access
point.
Enter the SSID. Refer to the memo that
you wrote for this information.
Option 3: PIN method
SSID
Network
(LAN) cable