37GB
Others
Specifications

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
Tweeter L+R
With 5ohms loads, both channels driven, from
500 - 20kHz ;
rated 10 watts per channels minimum RMS
power, with no more than 1% total harmonic
distortion from 1watts to rated output.
Power Output (reference):
Tweeter L+R 12W + 12 W (5 ohms, 1 kHz,
THD10%)
Woofer 12W (6 ohms, 100 Hz, THD 10%)

Wireless LAN section

Compatible standards:
IEEE 802.11 b/g
(WEP 64 bit, WEP 128 bit,
WPA/WPA2-PSK (AES),
WPA/WPA2-PSK (TKIP))
Radio frequency:
2.4GHz

Inputs/Outputs

Speakers
Tweeter Approx. 30 mm (1 3/16 in ) diameter × 4
Woofer Approx. 110 mm (4 3/8 in) diameter × 1
AUDIO IN jack:
Stereo mini jack
Voltage: 1.0 V
Network port:
10BASE-T/100BASE-TX (Auto Polarity)

General

Operating temperature:
0°C - 40°C (32 °F - 104 °F)
Power requirements:
AC adaptor
Input: 120-240V AC, 50/60Hz
Output: DC18V 2.6A
Power consumption:
When the unit is on: DC18V 1.3A
When the unit in the standby mode:
0.5W or below
When the unit in the network standby mode:
4.0W or below
Battery life:
Maximum volume level (30): Approx. 2 hours
Half volume level (15): Approx. 5 hours
Charging time:
When the unit in the network standby/standby
mode: Approx. 3 hours
When the unit is on: Approx. 5 hours
Dimensions (w/h/d) (including
projecting parts and controls):
Approx. 241 × 325 × 241 mm
(Approx. 9 1/2 × 12 7/8 × 9 1/2 in)
Mass
Approx. 4.2kg (9 lb 4 oz)
Supplied accessories:
See page 14.
Design and specifications are subject to
change without notice.