12GB
Bottom
QALL RESET pinhole button
Press and hold for more than three seconds
to reset the unit to its factory default
settings when the OPERATE ON/OFF
switch is set to ON.
Use a thin object, such as a small pin.
The bookmark list (page 28) and any other
previously registered settings or
information will be reset.
Note
Network settings are also reset when you press
ALL RESET button.
ROPERATE ON/OFF switch
Switch to ON to use or charge the unit.
Switch to OFF when you will not use the
unit for a long time (page15).
SSTANDBY MODE switch
Switch between the standby mode and the
network standby mode (page 15).