18GB
Notes
•Install the UPnP service in advance if you are
using WindowsXP (page 35).
•Refer to “Setting Screen on the Browser”
(page34) for deta ils on the display of [My
Network] or [Network].
•Check your set-up of the f irewall of the
security software if you cannot find
[SA-NS500] or the browser does not open
even if you double-click [SA-NS500] on
screen of your computer.
•Restart your computer if you cannot find
[SA-NS500].
5Select the desired language
when the “Language Setup”
screen appears.
6Select [Network Settings] from
the menu.
7Enter the SSID of your access
point, then select the security
method.
Enter the SSID and Security Method.
Refer to the memo that you wrote for this
information (page17).
Enter Security key (WEP/WPA key, etc.)
if you selected anything other than [No
Security] as a security method.
Note
You cannot input the following characters.
: / ? # [ ] @ ! $ & ' ( ) * + , ; = " %
8Click [Apply].
9Click [OK] when the
confirmation screen of the
pop-up window appears.
10Disconnect the unit and the
wireless LAN router/access
point following the on-screen
instructions.
The unit restarts automatically, then the
LINK indicator lights up in green when
the connection is made.
Tip
Refer to the operating instructions for details
on the access point.
Apply