Speaker System Hookup

 

1 Use an optional CONTROL S cord to connect the

Getting

CONTROL S IN jack on the left main unit to the

CONTROL S OUT jack on the back of the TV.

 

 

XBR2 series TV set or

 

Started

Projection TV

 

 

CONTROL S

 

Main unit (left)

 

 

 

IN OUT

 

 

 

 

ç

 

 

 

(Not supplied)

CONTROL S

 

 

IN

2Follow the Operating Instructions supplied with your TV set to set it to operate this speaker system.

zIf you use the S-video connector instead of the video jack

Your TV must also be connected via an S-video connector. S- video signals are on a separate bus from the video signals and will not be output through the video jack.

STEP 5 Connecting the FM/AM antennas

Set up the AM loop antenna, then connect it.

AM loop antenna

Extend the FM lead antenna horizontally.

Notes

•To prevent noise pickup, keep the AM loop antenna away from the system and other components.

•Be sure to fully extend the FM wire antenna.

•After connecting the FM wire antenna, keep it as horizontal as possible.

•When you connect the supplied AM antenna, connect the black cord (A) to the y terminal, and the white cord

(B) to the other terminal.

STEP 6 Connecting the AC power cord

Connect the AC power cord from the left main unit to a wall outlet.

Connecting other components

With its built-in amplifier, this speaker system can be used to output audio and video signals directly from such components as LD players, MD decks, digital satellite receivers, and VCRs.

If you connect a VCR

Connect the VCR to the AUDIO L/R and VIDEO jacks of VIDEO INPUT of the system.

VCR

R AUDIO L VIDEO

OUTPUT

Main unit (left)

L

R

AUDIO

VIDEO

IN

S-VIDEO

VIDEO

I N P U T

If you connect an LD player, another VCR, or other video components

Connect the component to the AUDIO L/R and VIDEO jacks of AUX of the system.

LD player, another VCR, etc.

R AUDIO L VIDEO

OUTPUT

Main unit (left)

L

D I G I T A L

OPTICAL

R

AUDIO

VIDEO

IN

S-VIDEO

AUX

I N P U T

12