Adjusting the equalizing parameters

You can adjust the bass and treble levels and select the subwoofer mode. The settings available here are stored individually for each sound field.

To adjust the bass and treble levels

Press BASS +/– or TREBLE +/– repeatedly on the remote. The levels change between –5 and +5.

To adjust the subwoofer mode

Press S.WOOFER MODE repeatedly on the remote to display the desired mode on the front panel display.

•SUB WOOFER 1: produces a powerful bass sound that is ideal for movies.

•SUB WOOFER 2: provides more subtle effects suitable for music.

•OFF: mutes the sound from the subwoofer.

Note

The subwoofer mode enhances the bass sound. However, you may not notice much difference depending on the program source.

Resetting the customized settings

You can reset all the customized settings to the factory preset settings except for the settings made in the control menu display (page 36) or setup display (page 49).

1Press AMP MENU repeatedly on the remote to display <<CUSTOMIZE>> on the front panel display.

2Select “MEMORY CLEAR N” (N:No) using the M/m buttons.

3Select “MEMORY CLEAR Y” (Y:Yes) using the </, buttons, then press ENTER.

“Are you sure?N” appears on the front panel display.

4Select “Are you sure?Y” using the </, buttons, then press ENTER.

“ALL CLEAR!” appears on the front panel display and all the customized settings for the sound fields are reset to the default ones.

z

You can change the dimmer level of the front panel display in the <<CUSTOMIZE>> menu. See page 33.

Note

This operation resets the preset radio stations, too.

Continued to the next page

Discs Playing

27