Settings for Sound
(AUDIO SETUP)
Select “AUDIO SETUP” after pressing the DVD SETUP button on the remote.
“AUDIO SETUP” allows you to select the sound track. The default settings are underlined.
AUDIO SETUP |
|
TRACK SELECTION: | OFF |
To set, press , then ENTER .
To quit, press SETUPDVDSETUP. .
xTRACK SELECTION
Gives the sound track which contains the highest number of the channels priority when you play a DVD on which multiple audio formats are recorded. If multiple audio channels are recorded in PCM, DTS or Dolby Digital format, the
•OFF : No priority given.
•AUTO : Priority given.
Notes
•When you set this item to “AUTO,” the language may change depending on the “AUDIO” settings in “LANGUAGE SETUP.” The “TRACK SELECTION“ setting has higher priority than that of “AUDIO” settings in “LANGUAGE SETUP” (page 52).
•If PCM, DTS and Dolby Digital sound tracks have the same number of the highest channels, the system selects PCM, DTS and Dolby Digital sound tracks, in this order.
•Depending on the DVD, the audio with priority may be predetermined. In this case, you cannot give priority to the DTS or Dolby Digital format by selecting “AUTO.”
Settings for Speakers
(SPEAKER SETUP)
Select “SPEAKER SETUP” after pressing the DVD SETUP button on the remote.
To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the balance and level. Then use the test tone to adjust the speaker volumes to the same level.
SPEAKER SETUP
SIZE: |
|
|
|
|
|
| |
|
|
|
|
|
| ||
DISTANCE: |
|
|
|
|
|
| |
BALANCE: |
|
|
|
|
|
| |
LEVEL: | OFF | ||||||
TEST TONE: | |||||||
| FRONT: |
|
|
|
|
| YES |
| CENTER: |
|
|
|
|
| YES |
| REAR: |
| BEHIND(LOW) |
SUBWOOFER:YES
To set, press , then ENTER .
To quit, press SETUPDVDSETUP. .
xSIZE
Since the front speaker, center speaker and subwoofer settings are fixed, you cannot change them. The default settings are underlined.
•FRONT
—YES: You cannot select otherwise.
•CENTER
—YES: You cannot select otherwise.
•REAR
—BEHIND (LOW), BEHIND (HIGH), SIDE (LOW), SIDE (HIGH): Specify the position and height to implement the Digital Cinema Surround modes in the “Virtual Multi Dimension” sound field (page 17) properly.
•SUBWOOFER
—YES: You cannot select otherwise.
Notes
•When you select an item, the sound cuts off for a moment.
•Depending on the settings of other speakers, the subwoofer may output excessive sound.
Continued to the next page
and Settings Adjustments
57