INPUT SETTING menu

You can adjust the following items using the INPUT SETTING

menu.

 

 

 

•

Auto Adjust

INPUT SETTING

1: HD15

•

Phase

 

 

 

 

Auto Adjust :

On

•

Pitch

 

 

Phase :

20

•

H Center

 

Pitch :

0

 

H Center :

50

•

V Center

 

V Center :

50

 

Input1 Priority :

DVI-D

•

Input1 Priority

 

 

Input2 Priority :

DVI-D

 

 

 

•

Input2 Priority

 

 

1920 ⋅ 1200/60 Hz

 

 

 

 

 

 

 

 

Select

Set OK Exit MENU

xAdjusting Picture Position and Sharpness (analog RGB signal only)

Note

When receiving digital RGB signals from the DVI-D input connector, adjustment is unnecessary.

Automatic picture quality adjustment function

When the monitor receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 18).

Note

While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate.

If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture

By pressing the AUTO button, you can make further automatic adjustment of the picture quality for the current input signal (page 5).

If you still need to make further adjustments to the picture quality

You can manually adjust the picture’s sharpness (phase/pitch) and position (horizontal/vertical position).

If you need to eliminate a shift of the picture occurring when the input signal has been changed

The shift is caused by the automatic picture quality adjustment function. You can deactivate this function (See “Auto Adjust” below).

These adjustments are stored in memory and automatically recalled when the monitor receives a previously input and registered input signal.

Eliminate a shift of the picture caused by the automatic picture quality adjustment (Auto Adjust)

1Press the MENU button.

The main menu appears on the screen.

2Press the M/m buttons to select (INPUT

SETTING) and press the OK button.

The INPUT SETTING menu appears on the screen.

3Press the M/m buttons to select “Auto Adjust” and press the OK button.

The options are displayed on the popup menu.

4Press the M/m buttons to select “Off” and press the

OK button.

To resume the automatic picture quality adjustment function

Select “On” in step 4 above.

Adjust the picture’s sharpness manually (Phase/Pitch)

You can adjust the picture’s sharpness as follows. This adjustment is effective when the computer is connected to the monitor’s HD15 input connector (analog RGB).

1Load the Utility Disk.

2Start the Utility Disk and display the test pattern. For Windows

Click [Utility] t [Windows]/[Win Utility.exe].

For Macintosh

Click [Utility] t [Mac]/[Mac Utility].

3Press the MENU button.

The main menu appears on the screen.

4Press the M/m buttons to select (INPUT

SETTING) and press the OK button.

The INPUT SETTING menu appears on the screen.

5Press the M/m buttons to select “Phase” and press

the OK button.

GB

The “Phase” adjustment menu appears on the screen.

6Press the M/m buttons until the horizontal stripes are at a minimum.

Adjust so that the horizontal stripes are at a minimum.

7Press the OK button.

The main menu appears on the screen.

If vertical stripes are observed over the entire screen, adjust the pitch using the following procedures.

8Press the M/m buttons to select “Pitch” and press the OK button.

The “Pitch” adjustment menu appears on the screen.

9Press the M/m buttons until the vertical stripes disappear.

Adjust so that the vertical stripes disappear.

10 Click [END] on the screen to turn off the test pattern.

15