Setup 4:Bundle the cords and cables

1Remove the arm cover.

2Bundle the cords and cables inside of the stand.

3Replace the arm cover and back cover.

Setup 5: Turn on the monitor and computer

1Press the MAIN POWER switch on the right side of the monitor in the direction of the [.

The 1 (power) indicator lights up in red.

back cover

Note

arm cover

1

2

3

MAIN POWER

lights in red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2Press the 1 (power) switch on the front right of the monitor.

The 1 (power) indicator lights up in green.

lights in green

GB

If you cannot bundle all of the cords and cables inside the stand, leave them hanging down outside the stand.

3Turn on the computer.

4Press the INPUT button to select the desired input signal.

The selected input signal indicator lights up and the picture appears on the screen.

For more information, see “Selecting the input signal (INPUT button)” on page 11.

The installation of your monitor is complete. If necessary, use the monitor’s controls to adjust the picture (page 12).

9