2Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the monitor’s HD15 input connector (analog RGB) for INPUT1 or INPUT2.

Connect the computer according to the following illustrations.

x Connecting to an IBM PC/AT or compatible computer

to the HD15 input connector (analog RGB) for INPUT1 or INPUT2

to the computer’s HD15 output connector (analog RGB)

 

HD15-HD15 video signal

IBM PC/AT or

cable (analog RGB)

(supplied)

compatible computer

xConnecting to a Macintosh

to the HD15 input connector (analog RGB) for INPUT1 or INPUT2

 

HD15-HD15 video

to the computer’s

signal cable (analog

output connector*

RGB) (supplied)

Macintosh

*When connecting a Macintosh computer, use an adapter (not supplied), if necessary. Connect the adapter to the computer before connecting the video signal cable.

Setup 3:Connect the power cord

1Connect the supplied power cord to the monitor’s AC IN connector.

2Connect it to a power outlet.

1

to AC IN

to power outlet

power cord (supplied)

2

8