Sony SDP-E800 Unpacking, Source Component Hookups, Getting Started, Before you get started

Getting Started

Unpacking

Check that you received the following items with the processor:

•Remote commander (remote) (1)

•Size AA (R6) batteries (2)

•Connecting cords (3)

Source Component Hookups

The surround processor allows you to connect up to 3 digital audio (video) source components, such as a DVD player, LD player (with AC-3 RF output) and CD player (etc.). You can also connect 1 analog source component, such as a VCR.

Inserting batteries into the remote

Insert two size AA (R6) batteries with the + and – on the battery compartment. When using the remote, point it at the remote sensor gon the processor.

	]
}	}
	]

zWhen to replace batteries

Under normal use, the batteries should last for about 6 months. When the remote no longer operates the processor, replace both batteries with new ones.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new battery with an old one.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Before you get started

•Do not connect the power cord to the mains or press the POWER switch before completing all connections.

•The cable connectors should be fully inserted into the jacks. Loose connection may cause hum and noise.

dANALOG c DIGITAL 3 b DIGITAL 2 a DIGITAL 1

What cords will I need?

•Optical digital connecting cord (not supplied)

•Coaxial digital connecting cord (not supplied)

•Video cable (not supplied)

Yellow Yellow

• Audio/video cable (not supplied)

Yellow	Yellow
White (L)	White (L)
Red (R)	Red (R)

Make sure to match the colour of the plugs and the jacks:

•Yellow jacks and plugs: Video signal

•Red jacks and plugs: Right audio channel

•White jacks and plugs: Left audio channel

4GB