Bottom

1

2

3

AAccess Cover for Service Use

Do not open this cover. For service use only.

BDip Switch Access Cover

If you need to change the data compression settings, remove this cover to change the DIP switch settings. For details about setting the DIP switches, see “Setting the DIP Switches” on page 19.

CAir Filter Unit

Be careful not to block the ventilation holes of the air filter unit. If you do, the S-AIT Tape Drive Unit may overheat, resulting in damage. Moreover, periodically clean the air filter unit with a vacuum cleaner (monthly cleanings recommended) and replace it yearly. For details about how to replace the air filter unit, see “Changing the Air Filter Unit” on page 42.

Chapter 1 Introduction

15