Installing the S-AIT Tape Drive Unit
The S-AIT Tape Drive Unit weights about 7 kg (15.4 lb.) and has the following dimensions. Make sure that the surface where you will install the S-AIT Tape Drive Unit is appropriate before installing the unit.
Note
Install the S-AIT Tape Drive Unit on a horizontal surface near an AC power outlet. Make sure that you leave gap of about 150 mm (5.9 in.) behind the rear of the unit to allow air to circulate.
86 mm (3.4 in.)
372 mm (14.6 in.)
210mm
(8.3 in.)
50 mm (2.0 in.)
Front | | | | | 210 mm (8.3 in.) | | Rear |
| | | |
| | | |
| | | | | |
| | | | | | | | 150 mm |
| | | | | | | | |
| | | | | | | | | (5.9 in.) |
| | | | | | | | |
| | | | | 372 mm (14.6 in.) | | | |
| | | | | |
| | | | | | | | | |
| | | | | | 50 mm (2.0 in.) |
| | | | | |
| | | | | | | | | |
Recommended positioning of the unit•Always position the unit horizontally.
•Away from moving air, such as fans, open windows, or air conditioners.
•Away from devices such as facsimiles to avoid toner and paper dust.
The S-AIT Tape Drive Unit should not be stacked. Do not place anything on top of the unit.
