5 Turn on your TV and set it to the channel you selected in step 1 (3CH or 4CH).

The channel you selected in step 4 appears on the TV screen. If the channels change when you press CH +/–, you have made the correct setting.

Whenever you use the DVD-VCR, set the TV to the channel selected in step 1.

Attaching the external antenna connector

When using a 300-ohm twin lead cable for a VHF/UHF antenna, use an antenna connector (not supplied) to connect the antenna to the DVD-VCR.

300-ohm twin lead cable

Antenna connector (not supplied)

1 Loosen the screws on the antenna connector.

2 Wind the twin leads around the screws on the antenna connector. 3 Retighten the screws.

Attaching a VHF/UHF band mixer

When using both a 75-ohm coaxial cable and a 300-ohm twin lead cable for a VHF/UHF antenna, use a VHF/UHF band separator/ mixer (not supplied) to connect the antenna to the DVD-VCR.

300-ohm twin lead cable

75-ohm coaxial cable

VHF/UHF band separator/ mixer (not supplied)

1 Loosen the screws on the mixer.

2 Wind the twin leads around the screws on the mixer. 3 Retighten the screws.

4 Connect the 75-ohm coaxial cable to the mixer.

112General setup information