To stop recording

To stop the VCR while recording, press x STOP.

To use the DVD-VCR after setting the timer

To use the DVD-VCR before a timer recording begins, just press ?/1. The timer indicator disappears from the display window and the DVD-VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR.

You can also do the following tasks while the VCR is recording:

•Reset the counter (page 44).

•Display tape information on the TV screen (page 46).

•Check the timer settings (page 59).

•Watch another TV program (page 47).

Tip

•To check, change or cancel the program setting, see “Checking/changing/canceling timer settings” on page 59.

Notes

•If the VCR does not accept the PlusCode number, this means that:

–The PlusCode number is incorrect.

–“Once,” “Daily,” “Mo~Sa,” “Mo~Fr” or “Weekly” was selected incorrectly. You cannot select “Daily,” “Mo~Sa,” “Mo~Fr” or “Weekly” for a program that airs more than seven days ahead.

Correctly set the PlusCode number again from step 2.

• When the PlusCode number is incorrect, “Invalid code” will appear in the display.

58Recording TV programs using the VCR Plus+® system (SLV-D560P only)