Recording TV programs using the timer

You can preset up to eight programs at a time.

Before you start…

•Check that the DVD-VCR clock is set to the correct time.

•Turn on the DVD-VCR and your TV.

•Switch the input selector on your TV so that the signal from the player appears on the TV screen.

•Set TV / DVD·VIDEO to DVD·VIDEO, then press SELECT VIDEO to control the VCR (page 10).

•When using a cable box, turn it on.

•Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time.

•If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback.

Z

CLEAR

SET UP

TV/VIDEO TIMER

INPUT SELECT

x STOP

H PLAY

V/v/B/b

ENTER

O RETURN

1

Press SET UP, then press V/v to select

(PROGRAM) and press ENTER. You can also

display the timer programming menu by pressing TIMER.

The timer programming menu appears.

CH START

END DATE SPEED

 

 

 

 

VvBb RETURN

48Recording TV programs using the timer