4

Press B/b to select an item.

 

5

Press SET UP to exit the menu.

 

Menu choices

• Dolby Digital

Selects the type of Dolby Digital signal. The default setting is indicated in bold print.

D-PCM

Select this when the player is connected to an audio component

 

lacking a built-in Dolby Digital decoder.

 

 

Dolby Digital

Select this when the player is connected to an audio component

 

with a built-in Dolby Digital decoder.

 

 

• DTS

Selects whether or not to output DTS signals. The default setting is indicated in bold print.

Off

Select this when the player is connected to an audio component

 

lacking a built-in DTS decoder.

 

 

On

Select this when the player is connected to an audio component

 

with a built-in DTS decoder.

 

 

• Audio DRC (Dynamic Range Control)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks:

–LINE OUT AUDIO L/R jacks

–DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby

Digital” is set to “D-PCM”.

The default setting is indicated in bold print.

Standard

Normally select this positon.

 

 

Wide Range

Gives you the feeling of being at alive performance.

 

 

Notes

•If you select the surround setting while playing a DVD, the player does not output Dolby Digital signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you set “Dolby Digital” to “D-PCM” in “AUDIO SETUP” menu).

•If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged.

•Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.

•If you set “DTS” to “On,” you cannot select surround setting (page 88).

•You cannot perform DTS audio output during playback quickly or slowly with sound (page 36).

Adjustments and Settings DVD

Audio Setup 67