Step 5 : Tuning your TV to the VCR

If your TV has a Scart (EURO-AV) connector, see page 20.

If your TV does not have a Scart (EURO-AV) connector

Follow the steps below so that your TV will properly receive the video signals from your VCR.

RF CHANNEL

 

 

PROGRAM +/–

 

 

 

 

 

 

 

1

AUTO SET UP

Press RF CHANNEL on the VCR lightly.

 

 

 

The factory-preset RF channel appears in the display window.

 

 

The VCR signal is output through this channel to the TV.

 

RF CHANNEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

Turn on your TV and select a programme position for the VCR

 

picture.

 

 

 

 

This programme position will now be referred to as the video

 

 

channel.

 

 

 

 

 

 

 

3

 

Tune the TV to the same channel

 

 

 

 

 

 

 

shown in the VCR display window

 

 

 

 

 

SONY VIDEO CASSETTE RECORDER

 

 

 

so that the picture on the right

 

 

 

 

 

 

 

appears clearly on the TV screen.

 

 

 

 

Refer to your TV manual for TV

 

 

 

 

tuning instructions.

 

 

 

 

If the picture does not appear

 

 

 

 

 

 

 

clearly, see “To obtain a clear

 

 

picture from the VCR” below.

 

 

 

 

 

 

 

 

 

 

 

continued

 

 

 

 

Tuning your TV to the VCR

Started Getting

19