1Connecting the VCR
1 
AERIAL IN
4 
AERIAL OUT
|
| 3 |
|
| 2 |
|
| ||||
l: Signal flow | |||||
1 ... Connect the aerial to AERIAL IN of the VCR.
2 ... Connect AERIAL OUT to the aerial input of your TV using the supplied aerial cable.
3 ... For better picture and sound, connect
4 ... Connect the mains lead to the mains.
3Tuning your TV to the VCR
RF CHANNEL
PROGRAM +/–
AIf your TV does not have a Scart
1.... Press RF CHANNEL on the VCR lightly.
2 ... Turn on your TV and select a programme position for the VCR picture.
3 ... Tune the TV to the same channel shown in the VCR display window so that SONY VIDEO CASSETTE RECORDER appears clearly on the TV screen. Refer to your TV’s instruction manual for tuning instructions.
4 ... Press RF CHANNEL.
BIf your TV has a Scart
2 ... Press PROGRAM +/– to set the RF channel to OFF.
2Using the Auto Set Up function
AUTO SET UP
You can preset channels.
Hold down AUTO SET UP on the VCR for more than three seconds.
When all the receivable channels are preset, “SET UP” disappears from the display window. You can rearrange the programme positions to your favourite order (see “Changing/disabling programme positions”).
3 ... Press RF CHANNEL.
Now you can operate your VCR.
Setting your personal code
For security, you can enter a personal code (up to eleven characters), such as your post code. If your VCR is stolen and then recovered, you can identify your VCR using your personal code. Once you enter the code, you can never change it. Please make a note of the code to quote to the police if your VCR is stolen.
Sony Corporation