Notes
•If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise.
•If the other VCR does not have a Scart
Operation (when recording on this VCR)
Before you start editing | X |
•Turn on your TV and set it to the video channel.
•Press INPUT SELECT to display
the connected line in the display window.
• Press SP/LP to select the tape speed, SP or LP.
z REC
1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press X (pause).
3 Press z REC on this VCR to set it to recording pause.
4 To start editing, press the X (pause) buttons on both VCRs at the same time.
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
•To cut out unwanted scenes while editing, press X (pause) on this VCR when an unwanted scene begins. When it ends, press X (pause) again to resume recording.
Note
•If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press z REC again during recording pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the OPC indicator stops flashing to start recording. If you press X (pause) before the OPC indicator stops flashing, the OPC function is cancelled.
68Editing with another VCR