Notes
•You cannot use this function unless the clock is set.
•Depending on the tape, the total or remaining time may not appear correctly.
•If many short programmes are recorded on a tape, multiple programmes may be included in a single block. In this case, only the latest programme information will appear in the SMART SEARCH screen.
•Blank time is measured from the end of the last recorded programme to the end of the tape. However, if you eject the tape and then make a new recording on the same tape, the original recorded programme(s) is displayed as a blank space.
•If no information is stored in the VCR’s memory, LATEST DATA does not appear in the SMART SEARCH screen.
•The station name may not appear if the VCR does not receive station name information signals.
•If you start recording a programme “D” from the middle of a previously recorded programme “A” and into another previously recorded programme “B,” the Smart Search information for the second programme “B,” which is recorded over, is deleted.
Originally recorded programmes
ABC
Recording the programme “D” over the programme “A” and “B”
ADC
Operations Additional
Searching using the Smart Search function 61