4

AUTO SET UP

Press RF CHANNEL.

 

You have now tuned your TV to the VCR. Whenever you want to play a tape, set the TV to the video channel.

RF CHANNEL

To check to see if the TV tuning is correct

Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct.

To obtain a clear picture from the VCR

If the screen does not appear clearly in step 3 above, press PROGRAM +/– so that another RF channel appears. Then tune the TV to the new RF channel so that a clear picture appears.

If your TV has a Scart (EURO-AV) connector

RF CHANNEL

PROGRAM +/–

1

AUTO SET UP

 

RF CHANNEL

Press RF CHANNEL on the VCR lightly.

The factory-preset RF channel appears in the display window.

The VCR signal is output through this channel to the TV.

2

PROGRAM

Press PROGRAM +/– to set the RF channel to OFF, and press RF

 

CHANNEL again.

AUTO SET UP

RF CHANNEL

RF channel set up is complete.

 

20Tuning your TV to the VCR