3

Press MENU to exit the menu.

MENU

4

Press ?/1 to turn off the VCR.

 

The indicator appears in the display window and the VCR stands by for recording.

To record from a decoder or other source, leave the connected equipment switched on.

To stop recording

To stop the VCR while recording, press x STOP.

Daily/weekly recording

In step 2 above, press m to select the recording pattern. Each time you press m, the indication changes as shown below. Press M to change the indication in reverse order.

TODAY t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday to Saturday) t MON-FRI (Monday to Friday) t SAT (every Saturday) ..... t MON (every

Monday) t SUN (every Sunday) t 1 month later t (dates count down) t TOMORROW t TODAY

To use the VCR after setting the timer

To use the VCR before a recording begins, just press ?/1. The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR.

You can also do the following tasks while the VCR is recording:

•Reset the counter (page 42).

•Display tape information on the TV screen (page 45).

•Check the timer settings (page 67).

•Watch another TV programme (page 45).

Tips

•To set the programme position, you can also use the PROG +/– or programme number buttons.

•To set the programme position with a two digit number, press -(ten’s digit) button followed by the programme number buttons.

•To set the line input video source, you can also use the PROG +/– buttons.

•To set the tape speed, you can also use the SP/LP button*2.

•When you are recording a programme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the OPTIONS-1 menu (page 74).*2

•Even if you set TIMER OPTIONS*1 to SHOWVIEW in the OPTIONS-2 menu, you can set the timer manually. Press MENU to select TIMER, then go to step 2.

•To check, change, or cancel the programme setting, press </, to choose LIST, then press OK in step 2. For details, see step 3 in “Checking/changing/cancelling timer settings” (page 67).

Operations Basic

continued

Recording TV programmes using the timer 59