| Symptom | Remedy | ||
|
|
|
| |
| No TV programme appears | • | Make sure the TV is set to the video channel. If you are using a | |
| on the TV screen. |
| monitor, set it to video input. | |
|
| • If your TV is connected to the VCR with both Scart and aerial | ||
|
|
| cables, make sure the RF channel is set to OFF (see page 15). | |
|
| • Existing broadcasts may interfere with the VCR. Reset the RF | ||
|
|
| channel output of your VCR. | |
|
| • Select the correct source with the INPUT SELECT button. Select | ||
Recording |
|
| a programme position when recording TV programmes; select a | |
|
| line input when recording from other equipment. | ||
|
|
| ||
|
|
| ||
| TV reception is poor. | • Make sure the aerial cable is connected securely. | ||
|
| • Adjust the TV aerial. | ||
|
|
|
| |
| The tape starts playing as | • | The safety tab has been removed. To record on this tape, cover the | |
| soon as it is inserted. |
| tab hole (see page 46). | |
|
|
|
| |
| The tape is ejected when | • | The safety tab has been removed. To record on this tape, cover the | |
| you press z REC. |
| tab hole (see page 46). | |
|
|
| ||
| Nothing happens when you | • Make sure the tape is not at its end. | ||
| press z REC. |
|
| |
|
|
| ||
| The timer does not operate. | • Check that the clock is set. | ||
|
| • Make sure a tape has been inserted. | ||
|
| • Check that the safety tab has not been removed. | ||
|
| • Make sure the tape is not at its end. | ||
|
| • Make sure a programme has been set for timer recording. | ||
|
| • Make sure your timer settings are past the current time. | ||
|
| • Check that the decoder is turned on. | ||
recording |
| • Check that the satellite tuner is turned on. | ||
| • The clock stops if the VCR is disconnected from the mains for | |||
|
| |||
|
|
| more than one hour. Reset the clock and timer. | |
|
| • Turn the power off and unplug the mains lead. | ||
Timer |
|
|
| |
The SHOWVIEW menu or | • Check that TIMER OPTIONS in the | |||
| ||||
| the TIMER menu does not |
| correctly (see page 75). | |
| appear. |
|
| |
|
|
| ||
| The VPS/PDC function | • Check that the clock and the date are set correctly. | ||
| does not operate properly. | • Check that the VPS/PDC time you set is the correct one (there | ||
|
|
| might be a mistake in the TV programme guide). If the broadcast | |
|
|
| you wanted to record did not send the good VPS/PDC information, | |
|
|
| the VCR will not start recording. | |
|
| • If the reception is poor, the VPS/PDC signal might be altered and | ||
|
|
| the VCR might not start recording. | |
|
|
|
|
80Troubleshooting