Specifications

System

Channel coverage PAL (B/G) VHF E2 to E12

VHF Italian channel A to H UHF E21 to E69

CATV S01 to S05, S1 to S20 HYPER S21 to S41

RF output signal

UHF channels 21 to 69 Aerial out

75-ohm asymmetrical aerial socket

Tape speed

 

SP: PAL

23.39 mm/s (recording/playback)

NTSC*1 33.35 mm/s (playback only)

LP*2:PAL

11.70 mm/s (recording/playback)

NTSC

16.67 mm/s (playback only)

EP*2:NTSC

11.12 mm/s (playback only)

Maximum recording/playback time

10 hrs. in LP mode (with E300 tape) Fast-forward and rewind time

Approx. 3 min. (with E180 tape)

Inputs and outputs

iLINE-1 (TV) 21-pin

Video input: pin 20

Audio input: pins 2 and 6

Video output: pin 19

Audio output: pins 1 and 3

DECODER/t LINE-2 IN (SLV-SE250D/P, SX250D, SE450D/P)

21-pin

Video input: pin 20

Audio input: pins 2 and 6

DECODER/t LINE-3 IN (SLV-SE300D1/D2, SE480D) 21-pin

Video input: pin 20

Audio input: pins 2 and 6

LINE-2 IN (SLV-SE300D1/D2, SE480D) VIDEO IN, phono jack (1)

Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative

AUDIO IN, phono jack (1) Input level: 327 mVrms

Input impedance: more than 47 kilohms

General

Power requirements

220 – 240 V AC, 50 Hz Power consumption

18 W Operating temperature

5° C to 40° C Storage temperature

–20°C to 60° C Dimensions

Approx. 355 × 96 × 285 mm (w/h/d) including projecting parts and controls

Mass

Approx. 3.6 kg

Supplied accessories

Remote commander (1)

R6 (size AA) batteries (2)

Aerial cable (1)

Design and specifications are subject to change without notice.

*1 SLV-SE100A1/A2 cannot play NTSC-recorded tapes. *2 not available on SLV-SE100A1/A2 and SE200V1/V2

Information Additional

Specifications 83