To

Press

 

 

Switch to/from wide mode of a Sony wide TV (For other

WIDE

manufactures’ wide TVs, see “Controlling other TVs with

 

the remote commander (SLV-SE300D1/D2 and SE480D

 

only)” below.)

 

 

 

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery together with an old one.

•Do not use different types of batteries together.

•Some buttons may not work with certain Sony TVs.

Started Getting

Controlling other TVs with the remote commander (SLV-SE300D1/D2 and SE480D only)

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturer’s code number.

1 Set [TV] / [VIDEO] at the top of the remote commander to [TV].

2 Hold down ?/1, and enter your TV’s code number using the programme number buttons. Then release ?/1.

Now you can use the following TV control buttons to control your TV:

?/1, t TV/VIDEO, programme number buttons, - (ten’s digit), PROG +/–,

2+/–, WIDE*, MENU*, M/m/</,*, and OK*.

*These buttons may not work with all TVs.

continued

Setting up the remote commander 7