Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
To switch to wide mode, see the footnotes below this table for the applicable code numbers.
Manufacturer | Code number |
|
|
Sony | 01*1, 02 |
|
|
Akai | 68 |
|
|
Ferguson | 52 |
|
|
Grundig | 10*1, 11*1 |
|
|
Hitachi | 24 |
|
|
JVC | 33 |
|
|
Loewe | 45 |
|
|
Mivar | 09, 70 |
|
|
NEC | 66 |
|
|
Nokia | 15, 16, 69*3 |
|
|
Manufacturer | Code number |
|
|
Panasonic | 17*1, 49 |
|
|
Philips | 06*1, 07*1, 08*1 |
|
|
Saba | 12, 13 |
|
|
Samsung | 22, 23 |
|
|
Sanyo | 25 |
|
|
Sharp | 29 |
|
|
Telefunken | 36 |
|
|
Thomson | 43*2 |
|
|
Toshiba | 38 |
|
|
*1 Press WIDE to switch the wide picture mode on or off.
*2 Press WIDE, then press 2 +/– to select the wide picture mode you want.
*3 Press WIDE. The menu appears on the TV screen. Then, press M/m/</, to select the wide picture you want and press OK.
Tip
•To see if you set your TV’s code number correctly, try turning your TV on and off with the ?/1 switch.
Notes
•If you enter a new code number, the code number previously entered will be erased.
•If the TV uses a different remote control system from the one programmed to work with the VCR, you cannot control your TV with the remote commander.
•When you replace the batteries of the remote commander, the code number may change. Set the appropriate code number every time you replace the batteries.
8Setting up the remote commander