Disabling unwanted programme positions
After tuning the TV channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. You can also disable unwanted programme positions using the SET UP CH AND
1 In step 5 above, press programme number button “0” twice to display the number “0” beside CHANNEL SET.
2 Press EXECUTE.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture is not clear, you may also use the manual tuning function.
1 Press PROG +/– to select the programme number for which you cannot obtain a clear picture.
2 Press MENU, then select TUNER PRESET and press EXECUTE.
3 Select FINE TUNING. The fine tuning meter appears.
Getting Started
TUNER PRESET |
| PROG14 | |||
SYSTEM |
|
|
|
|
|
B / G | D / K | ||||
NORMAL / CATV | NORM | CATV | |||
AUTO PRESET |
|
|
|
|
|
CHANNEL SET | 3 5 |
|
|
| |
AFT | ON | OFF | |||
FINE TUNING |
|
|
|
|
|
|
|
|
|
|
|
SET :
4 Press CURSOR ?// to get a clearer picture, then press EXECUTE.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Note
•The menu disappears automatically if you don’t proceed for more than a few minutes.
Getting Started 17
