Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony service facility.
Clock Power
Playback
Symptom | Remedy |
The ON/STANDBY switch | • Connect the mains lead to mains securely. |
does not function. |
|
|
|
The power is turned on but the | • Moisture condensation occurs. Turn the power off, |
VCR does not operate. | unplug the mains lead and leave the VCR to dry for |
| over one hour. |
The clock has stopped and | • The clock stops if the VCR is disconnected from the |
mains for more than an hour. Reset the clock (and | |
window. | timer). |
The playback picture does not | • Make sure the TV is set to the video channel. If you are |
appear on the TV screen. | using a monitor, set it to video input. |
|
|
The picture is not clear. | • Adjust the tracking with the TRACKING +/– buttons. |
| • Make sure the colour system is set to the system that |
| the tape was recorded in. |
| • The video heads are dirty (see below). Clean the video |
| heads using the Sony |
| cassette. If this cleaning cassette is not available in your |
| area, have the heads cleaned at your nearest Sony |
| service facility (a standard service charge will be |
| required). Do not use a commercially available wet- |
| type cleaning cassette, as it may damage the video |
| heads. |
| • The video heads may have to be replaced. Consult |
| your local Sony service facility for more information. |
The picture rolls vertically | • Adjust the vertical hold control on the TV or monitor. |
during picture search. |
|
|
|
The picture has no sound. | • The tape is defective. Use a new tape. |
| |
|
|
The sound is unstable or has an | • When you play a tape with the same sound recorded |
echo. | on both the |
| the AUDIO MIX option in the SET UP MENU is set to |
| OFF. |
50
Symptoms caused by contaminated video heads
• Normal picture | • Rough picture | • Unclear picture |
initial
Additional Information
•No picture (or black & white screen appears)
