Operation when recording on this VCR | Sony SLV-X827MN guide

Operation (when recording on this VCR)

Before you start editing	P PAUSE
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT to display “L2”
in the display window.
• Press TAPE SPEED to select the tape
speed (SP or LP for the PAL system,	r REC
and SP or EP for the NTSC system).

1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.

2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press P PAUSE.

3 Press r REC on this VCR and set it to recording pause.

4 To start editing, press the P PAUSE buttons on both VCRs at the same time.

To stop editing

Press the p STOP buttons on both VCRs.

Tips

•To edit more precisely, press the P PAUSE buttons on the VCRs to release pause.

•To cut out unwanted scenes while editing, press P PAUSE on this VCR when an unwanted scene begins. When it ends, press P PAUSE again to resume recording.

Note

•If you start recording following the procedure above, the VCR won’t start recording with the APC function. To record a tape with the APC function, press r REC again during recording pause in step 3 so that the VCR analyses the tape. Then when you start recording in step 4, press P PAUSE after the APC indicator stops flashing. If you press P PAUSE before the APC indicator stops flashing, the APC function is cancelled.

Additional Operations 49

SLV-X827MN 3-858-297-11 (1)

Image 49

Sony SLV-X827MN manual Operation when recording on this VCR, Before you start editing, To stop editing

Contents

SLV-X827MN 3-858-297-11 Video Cassette Recorder Safety PrecautionsInstalling SLV-X827MN Table of contents Getting Started Unpacking Using the remote commander Setting up the remote commanderInserting the batteries To operate Set Setting up the remote commander Controlling other TVs with the remote commanderCode numbers of controllable TVs Tip TEAC67 Mains lead To mains Signal flow Aerial cable Connecting the VCRSupplied To a TV that has audio/video input jacks Additional connectionsTo a stereo system Audio/video cable Tuning your TV to the VCR To obtain a clear picture from the VCR To check to see if the TV tuning is correct Before you start… Selecting a language Presetting all receivable channels automatically Presetting channels Execute Presetting channels PROG+ Presetting channels manually Channel coverage System D/K System B/G Press Prog +/- to select the programme position If the picture is not clear Disabling unwanted programme positions Code Setting up Press Cursor / twice to highlight Setting up G-CODE Setting up G-CODE for satellite broadcasts Changing programme positions Changing/ disabling programme positions Changing/disabling programme positions To disable Setting the clock Press Execute to start the clock Basic Operations Playing a tape# Search · P L AY Stop E W Replaying a recently watched scene Additional tasksTo set the colour system To play an NTSC-recorded tape To use the time counter Playing a tape Operation How to connect to use this function Prog + REC Recording TV programmes To check the remaining tape length To stop recordingTo watch another TV programme while recording To save a recording To record Ntsc colour system programmes Recording TV programmesTips Operations Recording TV Programmes Using G-CODE To record Select Recording TV programmes using G-CODE To record satellite broadcasts To use the VCR after setting the timer Setting the timer manually Daily/weekly recording To resume normal playback Playing/searching at various speedsAdditional Operations E W · P L a Y Playback options Operation Slow motion Reverse High speed Using the Click Shuttle ringReverse Tip To extend the duration Recording TV programmes using the quick timer Checking Changing/ cancelling timer settings When the timer settings overlap Checking/changing/cancelling timer settingsProgramme Will be Cut off Seconds will be cut off Zweiton German stereo system Recording stereo and bilingual programmesNicam system To select bilingual sound while recording How sound is recorded on a video tape Selecting the sound during playbackRecording stereo and bilingual programmes Stereo Bilingual Usually mixed left Right channels To stop searching Searching using the index function= / + Adjusting the tracking Adjusting the pictureAbout Adaptive Picture Control APC Menu choices Changing menu optionsMenu option Set this option to How to connect to a stereo system How to connect to record on this VCRVMC-810MS audio/video cable Not supplied Signal flow Editing with another VCR Before you start editing Operation when recording on this VCRTo stop editing Symptoms caused by contaminated video heads Troubleshooting Recording Timer recording Others Symptom Remedy Supplied accessories SpecificationsSystem Inputs and outputs Front panel Index to parts and controls Index to parts and controls Rear panel Display window Remote commander SLV-X827MN 3-858-297-11 V, W, X, Y Index