Sharp AR-M451N specifications Select the paper tray for the cover, When using the document glass

SPECIAL MODES

5 Select whether or not you wish to copy on the cover ("YES" or "NO").

PRINT ON COVER

YES NO

6 Select the paper tray for the cover.

(1)The currently selected

	CANCEL			OK	for	the
				paper tray
		PAPER TRAY		cover is displayed.
(1)				(2)The size and type of
			TRAY2
				paper in the currently
(2)			A4
				selected	tray	is
			PLAIN

displayed.

In the example screen above, A4 (8-1/2" x 11") size plain paper is loaded.

To change the paper tray for the cover, touch the tray selection key. (In the screen example, the " TRAY2" display is the tray selection key.)

The tray selection screen appears when the tray selection key is touched. Select the desired tray in this screen.

NOTES

●Two-sided copying is not possible on label sheets, and transparency film. When copying on a cover, do not select a tray that has one of these types of paper.

●Select the same size of paper for the covers as for the copies.

7 Touch the [OK] key.

CANCEL OK

RIGHT

G BINDING

COVER

SETTING

8 Touch the [OK] key.

OK	Return to the main
	screen of copy mode.

CANCEL OK

LEFT RIGHT

BINDING BINDING

COVER

SETTING

9 Place the original in the document feeder or on the document glass. (page 4-3)

10Ensure that the desired paper size has been automatically selected based on the original size.

UTO

					To	select another		size
		EXPOSURE
					paper, select the desired
					size	and	touch	the
	AUTO			A3
PAPER SELECT					[AUTO IMAGE] key. The
					appropriate		copy	ratio
					will	be	selected
			100%
		OPY RATIO			automatically based on

the original size and the paper size. (See steps 2 and 3 on page 4-15.)

11Select any desired copy settings such as the exposure or number of copies, and then press the [START] key.

12[Whenfeeder:] using the automatic document

Copying will start after all originals have been scanned. (The next step is not needed.)

[When using the document glass:]

Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned and then touch the [READ-END] key.

NOTES

●When the pamphlet copy function is set, the two- sided copying mode will be automatically selected.

●If this function is used in combination with the pamphlet copy function (pamphlet stapling) and the number of original pages exceeds the number of pages that can be stapled, a message asking you to select "CANCEL", "CONTINUE", or "DIVIDE" will appear.

To cancel the job, select "CANCEL". To make pamphlet copies without stapling, select "CONTINUE". To divide the pages into sets that can be stapled, select "DIVIDE".

If you performed steps 4 to 6 to insert cover paper, divided stapling is not possible. You can either continue pamphlet copying without stapling, or cancel the job.

To cancel the pamphlet copy function, touch the [CANCEL] key on the pamphlet copy setting screen (step 7).

5

5-7