Sharp AR-M451N 7-18, Property change, Touch the key of the desired attribute, Touch the OK key

CALLING UP AND USING A FILE

(11) [SEND SETTINGS] key (12) [SUB ADDRESS] key or [ADDRESS ENTRY] key

[SEND SETTINGS] key is displayed in E-mail/FTP mode and Internet FAX mode.

Touch this key to set the subject and file name. In E-mail/FTP mode, sender name can also be set.

●Touch this key to directly enter the destination for a Scan to E-mail/FTP or Internet fax transmission, .

●Touch this key to enter the sub-address and passcode for an F-code fax transmission.

NOTE

See the "Operation manual (for facsimile)" and "Operation manual (for network scanner)" for detailed explanations of (1), (2), (3), (4), (5), (6), (7), (8), (9), (11), and (12).

■[Property change]

Select this operation to change the attribute of a saved file. Three attributes are available: [SHARING], [PROTECT], and [ CONFIDENTIAL].

The following screen appears when the [PROPERTY CHANGE] key is selected in the operation selection screen. Note the restrictions below on changing the attribute.

JOB SETTINGS / PROPERTY CHANGE							CANCEL	OK
	Basic specifications			Yamada Taro		A4
			SHARING		PROTECT
		CONFIDENTIAL			PASSWORD

[Restrictions on changing the attribute]

●A file that is set to [SHARING] can be changed to [PROTECT] or [CONFIDENTIAL]. However, a [SHARING] file that is saved in the Quick File folder can only be changed to [PROTECT].

●A file that is set to [PROTECT] can be changed to [SHARING] or [CONFIDENTIAL]. However, a [PROTECT] file that is saved in the Quick File folder can only be changed to [SHARING].

●A file that is saved in the Quick File folder cannot be changed to [CONFIDENTIAL].

1 Touch the [PROPERTY CHANGE] key in the operation selection screen.

PROPERTY

CHANGE

DETAIL

2 Touch the key of the desired attribute.

SHARING	If you	are	changing a
	[SHARING]			or
	[PROTECT]		file	to
CONFIDENTIAL	[CONFIDENTIAL],
	touch the [PASSWORD]
	key	and	enter	the
	password.

PROTECT

3 Touch the [OK] key.

NCEL OK

PASSWORD

7-18