PLACING ORIGINALS

Using the automatic document feeder

1Open the document cover, make sure that an original has not been left on the document glass, and then gently close the document cover.

Using the document glass

Open the document cover, place the original face down on the document glass, and then gently close the document cover.

To make a copy of a small original such as a

postcard, use the [PAPER SELECT] key to select the desired paper size.

Original size detector

2 Adjust the original guides to the size of the originals.

3 Place the originals face down in the document feeder tray.

Place the originals face down.

Insert the originals all

the way into the document feeder. The stack height must not be higher than the indicator

line (maximum of 50 pages).

NOTE

Do not place any objects under the original size detector, because they may damage it or the original size may not be detected properly.

Original scale

 

 

Original scale

mark

 

 

mark

 

 

 

 

 

 

A5 or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5½ x 8½

 

B4 or

 

 

A4R or 8½x11R

 

 

 

 

 

 

 

8½x14

 

 

 

A4 or 8½x11

A3 or 11x17

 

 

Align the corner of the original with the tip of the

arrow mark on the document glass scale.

Place the original in the appropriate position for its size as shown above.

4

NOTE

Original size detection function

One of the four groups of standard original sizes shown below can be selected for detection by the original size detection function. The factory default setting is "AB-1 (INCH-1)". The setting can be changed using "ORIGINAL SIZE DETECTOR SETTING" in the key operator programs.

 

 

Detectable original sizes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Group

Document feeder tray (for automatic document feeder)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Document glass

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

INCH-1

11" x 17", 8-1/2" x 14", 8-1/2" x 11",

 

 

Document glass + A3, A4

 

 

8-1/2" x 11"R, 5-1/2" x 8-1/2"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

INCH-2

11" x 17", 8-1/2" x 13", 8-1/2" x 11",

 

 

Document glass + A3, A4

8-1/2" x 11"R, 5-1/2" x 8-1/2"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

AB-1

A3, A4, A4R, A5,B4, B5, B5R

 

 

Document glass + 11" x 17", 8-1/2" x 11",

 

 

216x330

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

AB-2

A3, A4, A4R, A5,B5, B5R, 216x330

 

 

Document glass + 11" x 17", 8-1/2" x 11",

 

 

B4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4-3

Page 83
Image 83
Sharp AR-M451N specifications Placing Originals, Using the automatic document feeder, Using the document glass