Sharp AR-M451N 7-22, Programming a user name, Touch the USER NAME key, Touch the INITIAL key

CUSTOM SETTINGS No.001

USER NAME

PASSWORD

SELECT THE DEFAULT FOLDER THE F STORED TO:

CUSTOM SETTINGS

■Programming a user name

To program a user name, follow steps 1 and 2 on page 7-21, touch the [USER NAME REGISTRATION] key in step 3, and then follow these steps:

1 Touch the [USER NAME] key.

The lowest number that has not yet been programmed appears

automatically in "No.". Touch the number to display a character entry screen and enter a user

name (maximum of 16 characters). See page 7-26 for the procedure for entering characters.

2 Touch the [INITIAL] key.

			A character entry screen
			appears. Enter up to 10
		NEXT
			search characters. See
	INITIAL		page 7-26 for the
			procedure for entering
			characters.
R THE FILE WITH THIS USER NAME IS STORED.

3 Touch the [PASSWORD] key.

CUSTOM	A password cannot be
No.001
USER NAME Yamada	omitted.
PASSWORD
SELECT THE DEFAULT FOLDER THE FIL
STORED TO:

4 Set a password for the user name (enter a 5-digit password with the numeric keys).

This will be the password

CANCEL for the user name

	entered in step 1.
ENTER PASSWORD VIA THE 10-KEY PAD.	As each digit is entered,
	"-"	changes	to " ". If
	you	make a	mistake,
	press the [C] key and
then enter the correct number.

6 If you wish to specify a folder for the user name, touch the [STORED TO:] key. If you wish to use the main folder, go to step 8.

No.001 REGISTRATION IS COMPLETED.

USER NAME Yamada

PASSWORD

SELECT THE DEFAULT FOLDER THE FILE

STORED TO: MAIN FOLDER

7 The folders that have been created appear. Touch the desired folder. If you wish to create a new folder, or if no folders have been created, touch the [ADD NEW] key.

STORED TO:							MAIN FOLDER	ADD NEW
	CUSTOM FOLDER 1				CUSTOM FOLDER 2
									1/1
	CUSTOM FOLDER 3				CUSTOM FOLDER 4
	CUSTOM FOLDER 5				CUSTOM FOLDER 6
	CUSTOM FOLDER 7				CUSTOM FOLDER 8
ALL FOLDERS		ABCD	EFGHI	JKLMN		OPQRS	UVWXY

If you touched the [ADD NEW] key, program a name for the folder as explained on page 7-24.

The user name programmed in step 1 is selected as the user name of the folder.

8 Touch the [EXIT] key.

		You will return to the
		"USER	NAME
	EXIT	REGISTRATION"
		screen.
		"REGISTRATION	IS
– – – – –		COMPLETED."	will

appear highlighted next to "No.".

9 To exit, touch the [EXIT] key. To program another user name, touch the [NEXT] key.

5 Touch the [OK] key.

EXIT

CANCEL OK

10-KEY PAD.

NEXT EXIT

INITIAL Yamada

WITH THIS USER NAME IS STORED.

If you touched the [EXIT] key, you will return to the screen of step 3 on page 7-21. If you touched the [NEXT] key, a new user entry screen will appear. Repeat steps 1 to 9 to program a new user.

7-22