Sharp AR-M451N Select the desired output mode page, 10Press the START key, Normal Copying

FILE

QUICK FILE

NORMAL COPYING

7 Select the desired output mode (page 4-9).

	The	sort mode		is the
2-SIDED COPY
	default mode.
	To	select	the	group
OUTPUT
	mode,		touch	the
	[OUTPUT]		key,	then
	touch the [GROUP] key
FILE
	on	the output		setting

screen, and then touch the [OK] key on the setting screen.

8 Use the numeric keys to set the desired number of copies.

Up to 999 can be set.

If you are only making a single copy, the copy can be made with the

copy number display showing "0". Use the [C] (clear) key to cancel an

entry if a mistake has been made.

9 If needed, touch the [FILE] key or the [QUICK FILE] key.

Either key can be touched to store the scanned document image on the machine's hard disk. The stored image can be re-used

later.

For more information on this function, see "Document filing function" in chapter 7.

If the [FILE] key is greyed out, only the [QUICK FILE] key can be selected.

When you touch the [QUICK FILE] key, a message asking you to confirm the save will appear. Touch the [OK] key in the message screen and go to the next step.

If you wish to cancel the save, touch the [QUICK FILE] key after touching the [OK] key so that the [QUICK FILE] key is no longer highlighted.

10Press the [START] key.

If the [C] key is pressed while originals are being scanned, scanning will

stop. If copying had already started, copying and scanning will stop after the original in

progress is output to the original exit area. In these cases the copy quantity will be reset to "0".

NOTES

●The 1-sided to 1-sided copying mode is set as the default in the initial settings. If the default setting has not been changed using the "Initial status settings" program (key operator program), steps 3 to 5 on page 4-7 can be omitted.

To cancel copying...

To cancel a copy job in progress, press the [CA] key. A confirmation message will appear. Touch the [YES] key to cancel copying.

4-8