Sharp AR-M451N 2-18, Misfeed in the transport area, fusing area, and exit area, Misfeed Removal

MISFEED REMOVAL

Misfeed in the transport area, fusing area, and exit area

CAUTION

The fusing unit is hot. Take care in removing paper. (Do not touch the metal parts.)

1 Unlatch the duplex module and slide it to the left.

Unlatch the module and gently move the module away from the machine. If the machine is not equipped with a duplex module, open the side cover similarly.

2 Remove the misfed paper as shown in the illustrations below.

Roller rotating knob A If paper is misfed in the

transport area, turn roller

rotating knob A in the

direction of the arrow to remove the misfed paper.

NOTE

Do not touch or damage the transfer roller.

Transfer roller

Do not touch or

damage the photoconductive drum.

Photoconductive drum

o

If paper is misfed in the fusing area, turn roller rotating knob B in the direction of the arrow to remove the misfed paper.

Roller rotating knob B

CAUTION

The fusing unit is hot. Take care in removing paper. (Do not touch any metal parts.)

If the misfed paper is inside the fusing area, turn down the fusing unit open tab to open the fusing unit and remove the misfed paper.

Fusing unit open tab

If paper is misfed in the exit area, remove it as shown while taking care not to tear the paper.

If the duplex module is equipped with an exit tray and paper is misfed in the exit area, remove the misfed paper as shown in the illustration.

3 Gently close the duplex module.

If the machine is not equipped with a duplex module, close the side cover.

After closing, confirm

that the misfeed message is cleared and the normal display appears.

2-18