Sharp AR-M451N 3-18, Using the saddle stitch finisher, Saddle Stitch Finisher, GROUP key See page

SADDLE STITCH FINISHER

Using the saddle stitch finisher

When [OUTPUT] is selected on the main screen of copy mode, a screen for making selections for sort, group, staple sort, saddle stitch, punch and exit tray will appear.

(1)(2)(3) (4)(5) (6) (7)

OUTPUT

SORT

STAPLE

SORT

GROUP

OFFSET

TRAY

OFFSET

OK

CENTRE

TRAY

SADDLE

STITCH PUNCH

(8)

(1)[GROUP] key (See page 3-15.)

When Group is selected, all copies of the same original will be grouped.

(2)[STAPLE SORT] key (See page 3-16.)

When Staple Sort is selected, sorted sets will be stapled and delivered to the offset tray. (They will not be offset stacked.)

(3)[SORT] key (See page 3-15.)

When Sort is selected, sets of copies will be sequentially delivered.

(4)Icon display

An icon representing a selected function (sort, staple sort or group saddle stitch) is displayed.

(5)[OFFSET TRAY] key

If Offset is checked, the offset will be enabled. If not checked, the offset will not function. If the staple sort is selected, the check mark of offset will be automatically selected.

(9)(10)

(6)[CENTRE TRAY] key

If the centre tray is selected, output paper will be delivered to the exit tray.

(7)[OK] key

Press to close the [OUTPUT] screen and to return to the main screen.

(8)[OFFSET] key (See page 3-15.)

When the offset tray is selected, copies will be delivered to the offset tray. When staple sort is selected, the offset tray will be automatically cancelled.

(9)[SADDLE STITCH] key (See page 3-17.)

When saddle stitching is selected, the copies will be stapled at the centre and delivered to the saddle stitch tray.

(10)[PUNCH] key (See page 3-17.)

If the saddle stitch finisher is equipped with a punch module, printed paper can be hole punched and delivered to the offset tray.

*As a selection is made, the touch key for the selection will be highlighted.

3-18