Sharp AR-M451N specifications 3-21, Disposal of hole punch scrap, front, Saddle Stitch Finisher

SADDLE STITCH FINISHER

9	Turn roller rotating knob A in the direction				12Return the lever to its original position.
	of the arrow to move the staple unit to the
	front.
		Turn	the roller	rotating
		knob	until the	triangle
		mark is aligned with the
		index.
Roller rotating
knob A		Staple unit

10Remove the staple box.

11Raise the lever at the end of the staple box.

Remove the top staple if it is bent. If bent staples remain, a staple jam will occur again.

13Reinstall the staple box.

Push the staple box in until it clicks into place.

14Push the stapler section back into the finisher.

15Close the front cover.

16Push the saddle stitch finisher back against the machine.

NOTE

Make a test print or copy in the staple sort mode to ensure that stapling is performed properly.

3

■Disposal of hole punch scrap

1Unlatch the saddle stitch finisher and slide it away from the machine.

2 Pull out the punch scrap collecting container and empty it.

Empty the punch debris into a plastic bag or other container for disposal, taking care not to spill any of the punch debris.

3 Return the punch scrap collecting container to its original position.

4 Push the saddle stitch finisher back against the machine.

3-21