Sharp AR-M451N specifications Misfeed in the duplex module, Misfeed in the bypass tray

MISFEED REMOVAL

Misfeed in the duplex module

1 Unlatch the duplex module and slide it to	5 Gently close the duplex module.
the left.	After closing the duplex
Unlatch the unit and
	module, confirm that the
gently move the module
	misfeed message is
away from the machine.
	cleared and the normal
	display appears.

2 If the duplex module has an exit tray, rotate it up out of the way and open the cover of the duplex module.

If no exit tray is attached, just open the cover of the duplex module and ignore any reference to the tray in the following steps.

3 While holding the exit tray up, remove the misfed paper as shown in the illustrations below.

If paper is misfed at the upper part of the duplex module, gently remove it while taking care not to tear the paper.

If paper is misfed at the lower part of the duplex module, gently remove it while taking care not to tear the paper.

■Misfeed in the bypass tray

1Unlatch the duplex module and slide it to the left.

Unlatch the unit and gently move the module away from the machine.

2 Remove the misfed from the bypass tray.

Be careful not to tear the misfed paper during removal.

2

4 Close the cover of the duplex module and lower the exit tray.

3 Gently close the duplex module.

After closing the duplex module, confirm that the misfeed message is cleared and that the normal display appears.

2-19