Sharp AR-M451N Select the desired copy mode, Display Will Vary, Depending, Equipment installed

NORMAL COPYING

Automatic two-sided copying using the automatic document feeder

When the optional duplex module is installed, the following automatic two-sided copying can be performed. The paper is automatically turned over during copying, allowing two-sided copies to be made with ease.

OriginalCopy

1.Automatic two-sided copying from one-sided originals

2.Automatic two-sided copying from two-sided originals

3.Automatic one-sided copying from two-sided originals

1 Place the originals in the document feeder tray. (pages 4-3 to 4-6)

2 Touch the [2-SIDED COPY] key.

SPECIAL MODES

2-SIDED COPY

OUTPUT

3 Select the desired copy mode.

	The display	will	vary
DED COPY	depending	on	the

BIND	equipment installed.
CHA

If a copy key is touched for a mode that cannot be selected, a double beep will sound.

Example of a	Example of a
portrait-oriented	landscape-oriented
original	original

When making automatic two-sided copies of a one-sided A3 (11" x 17") or B4 (8-1/2" x 14") size portrait original, or when you wish to invert the top and bottom of the back side of a two-sided original, touch the [BINDING CHANGE] key.

4 Touch the [OK] key.

0

OK

BINDING

Perform steps 6 through 10 on pages 4-7 and 4-8.

4-10