Sharp AR-M451N 3-15, Saddle stitch finisher functions, Supplies, Sort mode, Group mode

SADDLE STITCH FINISHER

		A4 or 8-1/2" x 11" or smaller size: 50 sheets*(80 g/m2 or 20 lbs.)
Stapling capacity		B4 or 8-1/2" x 14" or larger size: 25 sheets*(80 g/m2 or 20 lbs.)
		*Up to two sheets of 128 g/m2 or 34 lbs. paper can be included as covers.
		Upper tray: Single staple can be placed in the top left or lower left corners or two
Staples		staples can be centred on the left side.
		Lower tray: 120 mm (4-47/64") pitch from the centre of paper
Power supply		Supplied from machine
Dimensions		753 mm* (W) x 603 mm (D) x 953 mm (H) (29-41/64"* (W) x 23-3/4" (D) x 37-33/64" (H))
		*When the top tray is extended.
Weight		Approx. 39 kg (86 lbs.)
Name		Punch module
Model*1			AR-PN1A	AR-PN1B*2	AR-PN1C*3	AR-PN1D*3
Number of holes			2	3 or 2	4	4
		A3, B4, A4, A4R, B5,		3 holes: A3, A4,	A3, A4	A3, B4, A4, A4R, B5,
Paper sizes for	hole	B5R,	11"x17",	11" x 17", 8-1/2" x 11",		B5R,	11"x17",
punching		8-1/2"x14", 8-1/2"x11",		2 holes: 8-1/2"x14",		8-1/2"x14", 8-1/2"x11",
		8-1/2"x11"R		8-1/2" x 11"R		8-1/2"x11"R,

*1 Multiple punch modules cannot be installed together. Some models may not be available in some regions.

*2 With AR-PN1B, two or three holes can be punched depending on the paper size.

*3 With AR-PN1C and AR-PN1D, the number of holes is the same. The hole interval, however, is not the same.

Specifications are subject to change for improvement without notice.

Supplies

3

AR-SC2 staple cartridges must be used for this finisher. The cartridge package contains three cartridges approx. 5000 staples each.

Saddle stitch finisher functions

■ Sort mode	■ Group mode
Sorted sets will be delivered.	Groups of copies of the same page will be
	delivered.
Original	Printouts
	Original	Printouts
■ Offset mode
Offset mode	Non-offset mode

Sets will move from side to side so that each set or group will be offset from the previous set or group for easy separation. The offset function can only be used in the offset tray.

Stapled sets will not be offset.

3-15